- Barnett Crossbows 4x32 Multi-reticle Crossbow Scope Model 17060. New (Other) 4.5 out of 5 stars. 14 product ratings - Barnett Crossbows 4x32 Multi-reticle Crossbow Scope Model 17060. Time left 1d 17h left. Buy It Now +$13.65 shipping. Watch; Barnett 4x 32mm Crossbow Rifle Scope.
- Oct 05, 2010.
Whether you're just starting out with crossbows, or even if you're a veteran x-bow shooter, you might find that the most perplexing parts of setting up a new scope is sighting it in. It's important to get it done right, since this is key to your accuracy being dead-on and getting those all-important kill shots, but it can be a frustrating process if you don't know how to do it right.
Sure, there are some scopes out there that won't sight in properly no matter what you do. If you've done your research and read reviews of the scopes, though, this hardly is ever the case. Instead, it's usually a matter of technique. Follow these guidelines carefully, as well as our guide on mounting your crossbow scope to begin with, and you'll find yourself getting sighted in quickly and easily. Here's how to sight in a crossbow scope:
Barnett Crossbow Scope Review – 4x32mm Summary. Thanks for reading my review of the Barnett 4x32 multi-reticle crossbow scope. This scope is a decent value except for one major flaw: it fogs up very easily. If you are hunting in warmer temperatures, this is a great choice.
Gather what you'll need
First, make sure you have everything you'll need at the range.
- Your crossbow, with the scope already mounted and aligned.
- The instruction manual that came with your scope
- Screwdrivers for adjusting the windage and elevation on your scope
- A chronograph (if needed; read this entire how-to and decide whether or not you need one)
- A crossbow rest, bipod, and/or tripod
- Arrows (at least 4)
- Targets
- Binoculars or spotting scope
![Cross crossbow scope 4x32 Cross crossbow scope 4x32](https://opticgearlab.com/wp-content/uploads/2018/04/Barnett-4x32-Crossbow-Scope.jpg)
Sighting in the crossbow
Follow these steps to start off the process of sighting in your crossbow.
- Set up exactly 20 yards away from your target.
- Cock your crossbow using a rope or crank aid.
- Seat an arrow on the flight rail of your crossbow.
- Align the top-most red dot or reticle in your scope with the bull's eye.
- Squeeze the trigger quickly, using just the tip of your finger. Moving your entire palm or arm will ruin your accuracy.
Next, approach your target or check it with your binoculars or spotting scope. Is the arrow on the paper? If not, you need to 'boresight' your crossbow again by looking down the flight rail and aligning it with the bull's eye. Then, adjust the elevation and windage to get you close to the bull's eye.
Finally, for this part at least, fire three more arrows at the bull's eye of the target.
Adjust windage and elevation
Next, you'll adjust the windage and elevation of your scope based on how far off center your shots are.
- Approach your target, and estimate how many inches your arrow group would need to move for all the arrows to hit the bull's eye. For example, if your shots are 1' low and 2' left, you will need to adjust your scope up and to the right.
- Retrieve your arrows, and return to your crossbow.
- Remove the protective caps from the scope adjustment knobs and make the appropriate changes. You should follow the instructions that came with your scope, but most crossbow scopes will move the arrow point-of-impact by 1/20″ for each click at 20 yards.
Fire another salvo
Now that you've adjusted your scope, you can fire another round of three arrows.
- Stand at the same 20-yard distance from the target.
- Align the top-most dot or reticle on the bull's eye.
- Following the same technique as above, fire a total of 3 arrows at the target.
Check the grouping
You should find that your arrows land much closer to the bull's eye this time. You may find that you over-corrected a bit, or maybe didn't correct enough (especially if you lost count of the clicks). You can make more adjustments, as necessary, and repeat the process until your scope is perfectly sighted in.
Calibrating the range compensation reticles
Many after-market scopes offer range compensation reticles, but these have to be properly calibrated or they're worthless. In order to calibrate these markers, you program in the velocity of your crossbow with your arrows of choice, and the scope's internals do the rest. Do not ever rely on the stated velocity of a crossbow according to the manufacturer, though, or you won't get the same level of accuracy.
![Multi Multi](https://image.sportsmansguide.com/adimgs/l/reticle_306_ts.jpg)
Sighting in the crossbow
Follow these steps to start off the process of sighting in your crossbow.
- Set up exactly 20 yards away from your target.
- Cock your crossbow using a rope or crank aid.
- Seat an arrow on the flight rail of your crossbow.
- Align the top-most red dot or reticle in your scope with the bull's eye.
- Squeeze the trigger quickly, using just the tip of your finger. Moving your entire palm or arm will ruin your accuracy.
Next, approach your target or check it with your binoculars or spotting scope. Is the arrow on the paper? If not, you need to 'boresight' your crossbow again by looking down the flight rail and aligning it with the bull's eye. Then, adjust the elevation and windage to get you close to the bull's eye.
Finally, for this part at least, fire three more arrows at the bull's eye of the target.
Adjust windage and elevation
Next, you'll adjust the windage and elevation of your scope based on how far off center your shots are.
- Approach your target, and estimate how many inches your arrow group would need to move for all the arrows to hit the bull's eye. For example, if your shots are 1' low and 2' left, you will need to adjust your scope up and to the right.
- Retrieve your arrows, and return to your crossbow.
- Remove the protective caps from the scope adjustment knobs and make the appropriate changes. You should follow the instructions that came with your scope, but most crossbow scopes will move the arrow point-of-impact by 1/20″ for each click at 20 yards.
Fire another salvo
Now that you've adjusted your scope, you can fire another round of three arrows.
- Stand at the same 20-yard distance from the target.
- Align the top-most dot or reticle on the bull's eye.
- Following the same technique as above, fire a total of 3 arrows at the target.
Check the grouping
You should find that your arrows land much closer to the bull's eye this time. You may find that you over-corrected a bit, or maybe didn't correct enough (especially if you lost count of the clicks). You can make more adjustments, as necessary, and repeat the process until your scope is perfectly sighted in.
Calibrating the range compensation reticles
Many after-market scopes offer range compensation reticles, but these have to be properly calibrated or they're worthless. In order to calibrate these markers, you program in the velocity of your crossbow with your arrows of choice, and the scope's internals do the rest. Do not ever rely on the stated velocity of a crossbow according to the manufacturer, though, or you won't get the same level of accuracy.
- Set up your chronograph according to the manufacturer's instructions.
- Fire an arrow through the chronograph, and note the velocity.
- Repeat this process three more times, noting the velocity each time.
- Calculate the average velocity by adding the numbers together, and dividing by the number of shots (4, in this case).
- Dial in your scope's velocity setting, following the instruction manual that came with your scope.
Once this is done, your range compensation reticle markers should be calibrated to accurately shoot at the ranges advertised for each marker. You can test this by shooting at various ranges. If the accuracy is off, you should recheck your sight at 20 yards and recalibrate the velocity, again using the chronograph.
Keeping your scope sighted in
A properly sighted in scope should hold zero for quite some time, at least through a single hunting season. I've found that my scopes often hold zero through a couple of seasons, unless the scope is damaged or subjected to a fall. Regardless, always check your scope's zero before the beginning of each season.
Now question is how to sight in a barnett 4×32 crossbow scope. In this article i explain answer of this question let's go. The 'rings' ar the 2 mounting brackets that attach the scope to your bow. Scope rings are available several sizes, materials, and configurations. every size and configuration parameter should match your specific setup or they won't work.
How Easy is the Scope to Sight In?
The Barnett 4×32 multi-reticle bow scope is extremely simple to sight in, once you've got it put in with an honest set of rings. My initial time around with this scope, I couldn't cotton on within the bull's eye ring regardless of what number changes I created, and that i eventually got around to wanting rigorously at the rings and discovering that they were processed off the center line. I replaced the rings, which diode Pine Tree State to having the ability to sight within the scope among a brief quantity of your time.
Once seeing in, the scope holds zero for nearly eternity. I dialed it in once, then shot with the bow for 2 full seasons while not having to form any changes.
For your Barnett scope you would like 1″ rings, that refers to the dimensions of the opening at the highest of the rings (the mounting brackets) that encircles the 1″ diameter scope tube and holds it in situ. The bottom of scope rings have a clamping system that has got to properly match the kind of mounting base you have got. All the Barnett crossbows I've seen have Picatinny rails, therefore either 'one in. Picatinny' or 'one in. Weaver Style' rings ought to work.
The third essential parameter is ring height. My Barnett 4x32mm scope's largest diameter is at the ocular (eyepiece). the peak of the rings should be sufficiently tall to carry this 'fat' portion of the scope higher than the mounting base below it. you would like to pick out rings tall enough to permit AN air gap which will accommodate the removable scope cover; figure a few zero.1″ minimum air gap. Your ocular is 42mm, or 1.65″ Skipping the mathematics, for a 0.1″ air gap you would like .425″ minimum ring height (measured from wherever the rings contact the mounting base to very cheap purpose of the 'hole' or saddle that encircles the scope tube. anyplace between .425″ and .500″ ring height, base to bottom of ring's saddle, ought to be satisfactory.
You don't need the rings abundant taller than the required minimum as a result of redoubled scope height leads to bigger aiming error in the slightest degree distances apart from the space at that you zero the scope. This happens as a result of the scope is higher than the plane of the arrow, therefore the aiming purpose intersects with the purpose of impact at just one distance. The lower the scope height, the less error and contrariwise. It is also recommended that you should combine with night vision scope for better results when you are at night.
In summary, you would like 'one in. Weaver style' (or Picatinny style) rings with minimum .425″ height. watch out once scrutiny specs as some makers state their ring heights as I actually have delineated it (top of mounting base to bottom of scope ring hole), however some publish ring height from the highest of the mounting base to the middle of the scope mounting hole. If you encounter the latter, subtract .500″ from their explicit measuring to convert to the previous.
There ar several brands and designs spanning a large value vary. Avoid the 'five dollar' Chinese junk (you have already got that), however you don't want fancy or high-priced rings for this application. Burris alphabetic character Rings, high, #420087 would work well and ar $26 delivered on Amazon. These have ideal, .45″ saddle height, steel in order that they won't strip simply, matte black end. smart rings for tiny cash. Use Purple Locktite on all mounting screws; cosy up firmly however don't over-tighten. change the scope forward/backward for best image to your eye before protection it in situ.
Related Post:
1. Deer Hunting Quotes
2. Best Archery Quotes
3. Top 100 Hunting Quotes
4. 10 Best Hunting Apps
Cross 4x32 Scope Manual
Keystone cougar control panel manual.